1\. Material preparation Select and verify the type of slab (granite, marble, quartz, or sintered stone). Check thickness, dimensions, and integrity of the piece before cutting. Mark guideline lines according to drawings or requested measurements. 2\. Machine setup Adjust cutting parameters: speed, depth, water pressure, blade type. Install the appropriate blade based on material hardness. Ensure the table is level and the material is securely fixed. 3\. Cutting operation Perform straight, curved, or special cuts according to drawings. Operate manual machines, bridge saws, CNC cutting machines, or waterjet cutters. Control water cooling to prevent overheating or breakage. Ensure clean and precise cuts without chipping. 4\. Tool handling Use diamond blades, bridge saws, CNC machines, polishers, suction cups, and cranes. Adjust and change tools according to project requirements. 5\. Safety Wear PPE: goggles, gloves, mask, hearing protection, safety boots. Verify machine guards, sensors, and emergency stop systems. Maintain order and cleanliness in the work area. 6\. Quality control Measure cut pieces to verify accuracy (thickness, angles, dimensions). Inspect finishes, edges, and potential cracks. Make corrections if necessary. 7\. Basic maintenance Daily cleaning of machine and cutting table. Inspect belts, pulleys, guides, and hydraulic systems. Report malfunctions or tool wear. 8\. Interpretation of drawings or orders Read customer drawings, designs, and specifications. Translate exact measurements into the cutting process. Verify tolerances and technical details (joinery, cutouts, edges, etc.). 9\. Handling and transportation of pieces Move large slabs using overhead cranes or suction cups. Place pieces onto pallets or supports without damage. Ensure safe internal transport. Send CV via WhatsApp 908 891 677 Job type: Full-time, Permanent Salary: S/.1,000\.00 \- S/.1,500\.00 per month Work location: On-site employment